TIME7231 TIME7232 Vibration Meter


Product Description

Vibration Meter  TIME7231, TIME7232

Product Introduction: 
TIME7231/TIME7232 vibration tester is equipped with piezoelectric It can convert the vibration signal into electric signal, and then the value of acceleration, velocity, displacement or spectrum will be displayed by analyzing the inputting signal. TIME7231/TIME7332is always used for normal vibration testing, especially for the vibration testing of rotating or reciprocating machines.
 
Features: 
1. TIME7231 is equipped with low sensitivity probe, suitable for testing strong vibration signal.
2. TIME7232 is equipped with high sensitivity probe, suitable for testing weak vibration signal.
3. Two display modes: digital value mode and spectrum mode
4. Large memory function: 100×100 measured results (100 testing points, 100 data can be stored in each testing points); 100 Spectral chart, Spectrum chart can display in real time
5. Easy diagnosis: alarm is sounded when vibration go over limit set, and get into spectrum mode
6. Testing results and spectrum chart can be printed out when connected to printer
7. 300×200 matrix LCD display, with backlight
8. More accurate and stable especially in low frequency
Model TIME7231      TIME7232
 
Measuring range
Acceleration 1m/s2~392m/s2 (Peak) 0.1m/s2~20 m/s2 (Peak)
Velocity 0.1cm/s~80cm/s (RMS) 0.01cm/s~4cm/s (RMS)
Displacement 0.01mm~18.1mm (Peak-Peak) 0.001mm~0.8mm (Peak-Peak)
 
Frequency range
Acceleration 10Hz~200Hz, 10Hz~500Hz, 10Hz~1KHz, 10Hz~10KHz
Velocity 10Hz~200Hz、10Hz~500Hz、10Hz~1KHz
Displacement 10Hz~500Hz
Accuracy ±5%
Temperature 0ºC~40ºC
Relative humidity ≤80%
Dimension 171× 78.5×28mm
Power Li battery continuous working 20 hours