Conductivity Monitor CCT-3320V (CM-230 new version)

This instrument is a panel instrument for on-line monitoring of industrial process conductivity. Range switch over and constant check can both be freely set and adjusted through the operation component on the rear panel; unique signal collecting and processing technology and special thick film circuit are adopted to make measurement accurate and operation stable; there are also other features such as linearized data, automatic temperature compensation, not subject to the length change of cable and maintenance-free. It’s an ideal auxiliary instrument of various types of small pure water equipment.

Specifications:

1. Measurement range: 0~20, 0~200, 0~2000μS/cm

2. Accuracy: 1.5% (FS)

3. Stability: ±2×10^-3 (FS) / 24h

4. Auxiliary electrode: Plastic structure;  constant: 1.0cm^-1

5. Temperature compensation component: NTC

6. Medium temperature: 5~50°C

7. Thread dimension: 1/2″ pipe thread

8. Medium pressure: 0~0.5Mpa

9. Cable composition: Quad cable, copper mesh and foil shielded plastic jacket

10. Cable length: 5m or on other optional (5~30m)

11. Temperature compensation Automatic compensation: with 25°C as the reference temperature

12. Display: 3.5 bit LCD

13. Power supply: AC220V ±10%; 50Hz

14. Power consumption: ≤1W

15. Environment conditions: (1)Temperature: 5~50°C; (2)Humidity: ≤85%RH

16. Dimensions: 48×96×100mm (height × width × depth)

17. Slot dimensions for installation: 45×91mm (height × width)