CM-8855 Coating Thickness Meter


Product Description

Coating Thickness Meter CM-8855

Features
 
* Can store the new data in 99 groups.
* Two measuring methods: magnetic induction (F) and eddy current (N)
* Two measurement mode: Single and Continuous(Notice:Continuous mode is convenient to measure the coating thickness of curved objects and tiny objects.)
* Metric/imperial system selectable.
* Manual or automatic shut down.
* Automatic memory of calibration value,and automatic recognize the substrate.
* Operation process have buzzing reminder,while no buzzing in continuous mode.
* Use USB/RS-232 data output to connect with PC.
* Provide Bluetooth data output choice.
* Integral Type suitable for single-hand operation, large probe with large contact surface have better stability, users can get continuous, good repetitive and precise measurements.

SPECIFICATIONS
 
Display: 4 digits LCD, backlight
Range: 0~1250μm/0~50mil (other ranges can be specified )
Min. radius work piece: F: Convex 1.5mm/Concave 25mm; N: Convex 3mm/ Concave 50mm
Min. measuring area: 6mm
Min. Sample thickness : 0.3mm
Resolution: 0.1μm (0~99.9μm); 1μm (over 100μm)
Accuracy: ±1~3%n or 2.5μm or 0.1mil (Whichever is the greater)
Battery Indicator: Low batter indicator.
PC interface: with RS-232C interface
Power supply: 2x1.5 AAA(UM-4) battery
Operating condition: Temp. 0~50℃ . 
Humidity <95% .
Size: 126x65x35 mm;  5.0x2.6x1.6 inch
Weight: about 81g(not including batteries)
Standard accessories:
Carrying case ...................1 pc.
Operation manual ............ 1 pc.
F probe in built .................1 pc.
NF probe in built...............1 pc.
Calibration foils ..............1set.
Substrate (Iron) ................1 pc.
Substrate (Aluminium)......1 pc.
Optional accessories: RS-232C cable & software:
1.USB adaptor for RS-232C
2.Bluetooth  interface