Conductivity Controller CM-230KL

This instrument is a panel instrument for on-line monitoring of industrial process conductivity. Range switch over and constant check can both be freely set and adjusted through the operation component on the rear panel; unique signal collecting and processing technology and special thick film circuit are adopted to make measurement accurate and operation stable; there are also other features such as linearized data, automatic temperature compensation, not subject to the length change of cable and maintenance-free. It has control function, including setting of over limit of conductivity, and the outputs are control contacts. It’s an ideal auxiliary instrument of various types of small pure water equipment.

Specifications:

1. Measurement range: 0~20.00, 0~200.0, 0~2000, 0~9999μS/cm automatic switch, Temp.:0~100°C

2. Accuracy: ±2% (FS)

3. Display mode: 4 digit 0.56" (14mm) LED digital display

4. Auxiliary electrode: K=1.00 plastic electrode (K=0.1 0~200.0μS/cm, K=0.01 0~20.00μS/cm optional, plastic or stainless steel)

5. Thread dimension: G1/2″ pipe thread

6. Current Output: 4~20mA

7. Relay Control: Single 1 high point setting, contact capacity 3A/220V; 2 High Low points setting (optional)

8. Temperature compensation: Automatic compensation 0~60°C

9. Power supply: AC220V ±10%; 50Hz or DC24V (optional)

10. Operation pressure of conductance cell: 0~0.5MPa

11. Cable length: 5m or on other agreement

12. Dimensions: 48 x 96 x 100mm

13. Slot dimensions for installation: 45 x 91mm