3 in 1 AMT577 Ultrasonic Coating Thickness and Vibration Meter 

Features:

1.Pocket size, weight only 250g, easy to carry

2.Can measure the thickness of metal or magnetic materials; can measure the thickness of the coating on the outside of magnetic workpieces; can measure the vibration of the workpiece.

3.No need acoustic coupling agents

4.Low requirements for the surface of the workpiece, no need for polishing treatment on rough surfaces, and non-contact measurement can be achieved

5.Not sensitive to coatings, can achieve thickness measurement of coated workpieces

6.With optional high temperature sensor, can measurement thickness of high-temperature workpieces, temperature compensation can be carried out

7.1.3" high-definition IPS circular LCD screen display, 360° without dead corners

8.0.42-inch OLED screen with high brightness display of acceleration

9.The instrument consists of a host and a mobile phone, which are wirelessly connected via WiFi

10.The probe and host are integrated machines, and the probe can be replaced

11.After connecting the phone and tablet, there are two functions: A-scan and B-scan

12.Configurable probe types: probe (≤80ºC, short-term measurement), high-temperature probe (≤800ºC, short-term measurement)

13.Configurable high-temperature handle: short handle (meeting the inspection requirements of up to 350ºC, short-term measurement), long handle (meeting the inspection requirements of up to 800ºC, short-term measurement)

Specifications:

1. Thickness range: 1.5~240.0mm

2. Detectable workpiece material: Conductor materials such as carbon steel, cast steel, alloy steel, stainless steel, copper, aluminum, titanium, etc

3. Measurement equipment error range: When the workpiece thickness is less than 10mm, the error is 0.05mm; When the workpiece thickness is >10mm, the error is +(0.01+H/200)mm (H is the workpiece thickness value)

4. Receiver gain: ≤100dB

5. Maximum lifting distance: 9mm

6. Maximum measurement range of coating: 6mm

7. Vibration measurement range: 0~156m/s2

8. Maximum tilt angle of the probe: ±25°

9. Minimum diameter (curvature) of detectable workpiece: 6mm

10. Probe excitation method: Permanent magnet

11. Sound wave type: Shear wave

12. Waveform display: Positive half wave, negative half wave, full wave, RF wave, envelope wave

13. Range of sound speed adjustment for sound waves: 1000~9999m/s

14. High temperature compensation: Equipped with high-temperature sound speed automatic compensation function

15. Power supply: Built in lithium battery, with a working time of no less than 5 hours

16. Low power mode: Support Gecko mode, with standby time of over 20 hours

17. Normal operating temperature range of the host: -10~+50ºC

18. Host storage temperature range: 0-+40ºC

19. Weight: 250g

20. Overall dimensions of the host: 170 × 40 × 35mm

Stanadard Packing:

1: Host

2: Charging data cable

3: Charging plug

4: Instructions

5: Iron based test block

6: Aluminum based test block

Optional Parts:

1. High temperature probe

2. Small diameter probe 10mm

3. Mobile phone

4. Pad

5. Wrist watch