With injection molding process case, single stage RO system, 1 pump, portable TDS test pen and on-line resistivity monitor, Smart-S series ultrapure water system is sub-economic choice of ultrapure water for high grade experiments. With tap water inlet, its output ranges from 15 to 30 liters/hour. It can produce single stage RO water and ultrapure water. The single stage RO water´s ion rejection rate is more than 97%, and the ultrapure water´s resistivity absolutely reaches to 18.2MΩ.cm. It completely meets the highest grade I standard of ASTM, CAP, CLSI, EP and USP.
Specifications:
1. Model:
1) Standard Model: Smart-S15; Smart-S30
2) Eliminating endotoxin: Smart-S15UF; Smart-S15UVF
3) Low TOC: Smart-S15UV; Smart-S30UV
4) Synthesizing: Smart-S30UF; Smart-S30UVF
2. Output(25°C)*: 15series-15 liters/hour, 30 series-30 liters/hour
3. Flow rate: Up to 2 liters/minute (with pressure tank)
4. Pure water outlet 2: reverse osmosis water, ultrapure water
5. ltrapure water quality:
1) Resistivity (25°C): 18.2MΩ.cm
2) TOC*: <10ppb (S15,S30,S15UF,S30UF); <3ppb (S15UV,S30UV,S15UVF,S30UVF)
3) Bacteria: <0.01cfu/ml
4) Particle(>0.1µm): <1/ml
5) Endotoxin: <0.001Eu/ml (S15UF,S30UF,S15UVF,S30UVF only)
6) RNases: <1pg/ml (S15UF,S30UF,S15UVF,S30UVF only)
7) DNases: <5pg/ml (S15UF,S30UF,S15UVF,S30UVF only)
6. RO water quality
1) Ion rejection rate: 97%-99% (new RO membrane)
2) Organic rejection rate: >99%, when MW>200 Dalton
3) Particles and bacteria rejection rate: >99%
7. Feed water requirements: Tap water, temperature:5-45°C, pressure:1.0-4.0Kgf/cm2
8. Dimension and weight: 410×220×420mm / Weight: about 18Kg
9. Electrical requirements: AC100-240V, 50/60Hz
10. Power: 72W
11. Standard configuration: Main body (Including 1 set of cartridge) + 15 liters pressure tank + TDS/conductivity test pen
Remarks: *The value will be influenced by temperature and feed water´s quality.
Cartridges:
1. PC-M-PP: 5µm spun fiber cartridge: 2-6 months
2. PC-PP-ZK: Special spun fiber cartridge: 2-6 months
3. PC-AC-B-ZK: Special active carbon block cartridge: 6 months
4. RO-100GPD: 100 GPD reverse osmosis membrane: 12-24 months
5. RO-200GPD: 200 GPD reverse osmosis membrane: 12-24 months
6. PTC-MBR-K: Mixed bed resin cartridge: 1000 liters pure water
7. PTC-UPPR-K: Ultrapure polishing resin cartridge: 1000 liters pure water
8. TF-(0.45+0.1)µm-S: (0.45+0.1)µm terminal filter
9. UF-5000D: MWCO5000D UF cartridge
10. LAMP-(185nm&254nm)-10W-K: Double wavelength(185&254)nm uv lamp: 9000 hours
11. LAMP-254-10W-K: 254nm wavelength uv lamp: 9000 hours
